Mixer Behringer EURORACK UB1204-PRO

(0 đánh giá)

Mã SKU: BRG177
Mã hàng : UB1204-PRO
Bảo hành : 12 tháng
Tình trạng : Còn hàng
Xuất xứ: Chính hãng( Cung cấp Co,Cq, - Invoice/Packing List)

Liên hệ

Số lượng

Tư vấn & Báo giá

Hướng dẫn mua hàng

Phương thức thanh toán

Giới thiệu Mixer Behringer EURORACK UB1204-PRO

Mixer Behringer EURORACK UB1204-PRO là bộ trộn âm của thương hiệu Behringer thuộc dòng sản phẩm Behringer Small Format Mixers hiện được nhập khẩu và phân phối chính hãng bởi behringervietnam.vn tại Việt Nam.

This is a mixer whose small size belies its incredible versatility and audio performance. You get 8 balanced high-headroom line inputs, 4 INVISIBLE MIC PREAMPs (IMPs), 2 aux sends per channel (1 pre fader for monitoring applications and 1 post fader for external FX devices)

Đặc điểm của Mixer Behringer EURORACK UB1204-PRO

4 mono channels with studio-grade "Invisible" Mic Preamps and phantom power plus 2 stere
2 subgroups with one fader, 2 aux sends and 2 stereo aux returns
3-band EQs on all mono and stereo channels (low cut on all mono channels)
Improved ULN design with 4580 op-amps for highest possible headroom and ultra-transparent audio
Internal switch-mode power supply, 60 mm ALPS® faders and sealed rotary controls

Mixer Behringer EURORACK UB1204-PRO

Thông số kỹ thuật Mixer Behringer EURORACK UB1204-PRO:

Inputs	Mono Inputs Microphone Inputs (IMP Invisible Mic Preamp) Type: XLR, electronically balanced, discrete input circuit Mic E.I.N. (20Hz - 20kHz) @ 0 ohms source resistance: -134dB / 135.7dB A-weighted @ 50 ohms source resistance: -131dB / 133.3dB A-weighted @ 150 ohms source resistance: -129dB / 130.5dB A-weighted Frequency response < 10Hz - 150kHz (-1dB), < 10Hz - 200kHz (-3dB) Gain range: +10 to +60dB Max. input level: +12dBu @ +10dB gain Impedance: approx. 2.6k ohms balanced Signal-to-noise ratio: 110dB / 112dB A-weighted (0dBu In @ +22dB gain) Distortion (THD+N): 0.005% / 0.004% A-weighted Line Input Type: 1/4" TRS connector electronically balanced Impedance: approx. 20k ohms balanced 10k ohms unbalanced Gain range: -10 to +40dB Max. input level: 30dBu Stereo Inputs Type: 1/4" TRS connector, electronically balanced Impedance: approx. 20k ohms Max. input level: +22dBu
Attenuation	Fade-out Attenuation (Crosstalk Attenuation) Main fader closed: 90dB Channel muted: 89.5dB Channel fader closed: 89dB
Frequency Response	Microphone input to main out < 10Hz - 90kHz: +0dB / -1dB < 10Hz - 160kHz: +0dB / -3dB
EQ Section	EQ Mono Channels Low: 80Hz / ±15dB Mid: 2.5kHz / ±15dB High: 12kHz/ ±15dB EQ Stereo Channels Low: 80Hz / ±15dB Mid: 2.5kHz / ±15dB High: 12kHz / ±15dB
AUX Sends	Type: 1/4" TS connector, unbalanced - 2x Impedance: approx. 120 ohms Max. output level: +22dBu
AUX Returns	Type: 1/4" TRS connector, electronically balanced - 2x stereo Impedance: approx. 20k ohms balanced / 10k ohms unbalanced Max. Input Level: +22dBu
Outputs	Main Outputs Type: XLR, electronically balanced Impedance: approx. 240 ohms balanced / 120 ohms unbalanced Max. Output Level: +28dBu Control Room Type: 1/4" TS connector, unbalanced Impedance: approx. 120 ohms Max. output level: +22dBu Headphones Output Type: 1/4" TRS connector, unbalanced Max. output level: +19dBu / 150 ohms (+25dBm)
Noise	Main mix @ -oo, Channel fader -oo: -105dB / -108dB A-weighted Main mix @ 0dB, Channel fader -oo: -95dB / -97dB A-weighted Main Mix @ 0dB, Channel fader @ 0dB: -82,5dB / -85dB A-weighted
Power Supply	Mains voltage: 100 to 240 V~, 50/60Hz Power consumption: 40 W Fuse: 100-240V~: T 1.6A H Mains connection: Standard IEC receptacle
Dimensions (HxWxD)	3.81 x 9.72 x 12.91" (97 x 247 x 328mm)
Weight	5.64lb (2.56kg)

>> xem thêm Mixer BEHRINGER XENYX X2442USB

Inputs	Mono Inputs Microphone Inputs (IMP Invisible Mic Preamp) Type: XLR, electronically balanced, discrete input circuit Mic E.I.N. (20Hz - 20kHz) @ 0 ohms source resistance: -134dB / 135.7dB A-weighted @ 50 ohms source resistance: -131dB / 133.3dB A-weighted @ 150 ohms source resistance: -129dB / 130.5dB A-weighted Frequency response < 10Hz - 150kHz (-1dB), < 10Hz - 200kHz (-3dB) Gain range: +10 to +60dB Max. input level: +12dBu @ +10dB gain Impedance: approx. 2.6k ohms balanced Signal-to-noise ratio: 110dB / 112dB A-weighted (0dBu In @ +22dB gain) Distortion (THD+N): 0.005% / 0.004% A-weighted Line Input Type: 1/4" TRS connector electronically balanced Impedance: approx. 20k ohms balanced 10k ohms unbalanced Gain range: -10 to +40dB Max. input level: 30dBu Stereo Inputs Type: 1/4" TRS connector, electronically balanced Impedance: approx. 20k ohms Max. input level: +22dBu
Attenuation	Fade-out Attenuation (Crosstalk Attenuation) Main fader closed: 90dB Channel muted: 89.5dB Channel fader closed: 89dB
Frequency Response	Microphone input to main out < 10Hz - 90kHz: +0dB / -1dB < 10Hz - 160kHz: +0dB / -3dB
EQ Section	EQ Mono Channels Low: 80Hz / ±15dB Mid: 2.5kHz / ±15dB High: 12kHz/ ±15dB EQ Stereo Channels Low: 80Hz / ±15dB Mid: 2.5kHz / ±15dB High: 12kHz / ±15dB
AUX Sends	Type: 1/4" TS connector, unbalanced - 2x Impedance: approx. 120 ohms Max. output level: +22dBu
AUX Returns	Type: 1/4" TRS connector, electronically balanced - 2x stereo Impedance: approx. 20k ohms balanced / 10k ohms unbalanced Max. Input Level: +22dBu
Outputs	Main Outputs Type: XLR, electronically balanced Impedance: approx. 240 ohms balanced / 120 ohms unbalanced Max. Output Level: +28dBu Control Room Type: 1/4" TS connector, unbalanced Impedance: approx. 120 ohms Max. output level: +22dBu Headphones Output Type: 1/4" TRS connector, unbalanced Max. output level: +19dBu / 150 ohms (+25dBm)
Noise	Main mix @ -oo, Channel fader -oo: -105dB / -108dB A-weighted Main mix @ 0dB, Channel fader -oo: -95dB / -97dB A-weighted Main Mix @ 0dB, Channel fader @ 0dB: -82,5dB / -85dB A-weighted
Power Supply	Mains voltage: 100 to 240 V~, 50/60Hz Power consumption: 40 W Fuse: 100-240V~: T 1.6A H Mains connection: Standard IEC receptacle
Dimensions (HxWxD)	3.81 x 9.72 x 12.91" (97 x 247 x 328mm)
Weight	5.64lb (2.56kg)